We are proud to introduce the first user interface compatible with Garmin, Raymarine and Furuno plotters in the world. HP watermakers is directly connected to the plotter via an RJ45 ethernet network cable and it is automatically recognized and displayed by the system. The interface system allows the users to keep monitored and operate our full automatic RP TRONIC watermakers and all check and set all its parameters. The interface allows to switch the watermaker on or off, reset the alarms, monitor the operations and check all the data of the watermaker connected to the Garmin, Raymarine and Furuno without needing a remote control panel dedicated for the system. It will also be possible to check the log of the watermaker and monitor all the history of alarms and uses. The visualization of the machine functionality is synoptic, with the image of the watermaker and the moving water lines during the operation of the system, and analogical with the production data like working hours, the total water production, the working pressure, the actual production and water quality. Itís also possible to calibrate and turn off all the sensors and all machine settings, including the unitís operating parameters. A page of the interface is dedicated to the manual which is available at all times on the plotter. With this new interface, HP Watermakers is the first to communicate directly and automatically with the most used plotters around the world.